Installing the Wall mount
59
Manually adjust the position of the setting plate according to the guide screen displayed. This is useful when you
want to perform fine adjustments to the projection position while maintaining the image quality.
•
Adjusting using the projector menus ( p.68)
Select the area you want to adjust and manually correct the image. This is useful when you want to make fine
adjustments to the projection position after making mechanical adjustments using the guide screen.
Quick Corner Arc Correction Point Correction
c
•
Images are not stable immediately after turning on the projector. After starting projection, wait for at
least 30 minutes before adjusting the image.
•
Install and adjust the projector at a room temperature that is close to the actual intended usage
environment. If the temperature changes, the position of the image may shift or the accuracy of the
pen may decline.
•
When setting up multiple projectors using the batch setup function, perform the batch setup before
adjusting the projected image.
•
We recommend the mechanical position adjustment of the setting plate to adjust the image when
you want to maintain image quality.
Preparations before adjusting
a
Press the [ ] button on the remote control or the control panel to turn on the projector
To Next Page
Loading...
