Attention
• If the input source is on when you connect it to the projector, it could cause a malfunction.
• If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a
• If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.
• When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
• You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio-L/R port using a
commercially available audio cable.
Connecting Equipment
24
To Next Page
Loading...
Need help?
General
