Submenu Function
Plug-in Power
When set to On you can use a microphone with Plug-in
Power support.
USB Type B
Set to USB Display when the projector and a computer are
connected by a USB cable and computer images are
projected.
s "Projecting with USB Display" p.32
Set to Wireless Mouse when the mouse pointer is to be
operated by the Remote Control.
s
"Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)" p.54
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for Display
*1
and
Operation
*3
from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.92
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)" p.59
*2
Audio is not output from the microphone when Power On Protect from
Password Protect is set to On.
*3 Except for High Altitude Mode.
Network Menu
When Network Protect is set to On in Password Protect, a message is
displayed and the network settings cannot be changed. Turn Network
Protect Off and then configure the network.
s "Setting Password Protect" p.59
Submenu Function
Net. Info. - Wire‐
less LAN
Displays the following network setting status information.
• Connection Mode
• Antenna Level
• Projector Name
• SSID
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Region Code
*
Net. Info. -
Wired LAN
Displays the following network setting status information.
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
List of Functions
83
To Next Page
Loading...
Need help?
General
