Features of Firmware Version 2.10
5
Refer to these sections for a summary of the updated features of projector
firmware version 2.10.
gg Related Links
• "Updates to Projector Menus (Version 2.10)" p.5
• "Updates to User Operations (Version 2.10)" p.5
Updates to Projector Menus (Version 2.10)
The following projector menus change in firmware version 2.10.
• The projector can hold the last position of the cursor in the projector menu.
• The EDID menu is added to the Signal menu.
• The Maintain Aspect Ratio menu is added to the Settings menu.
• The Reset All (Factory Default) menu is added to the Reset menu.
• The color temperature is specified with Kelvin in all color modes.
• Cross-hatching test patterns in red, green and blue are available.
gg Related Links
• "Cursor Position Memory of Projector Menus" p.15
• "EDID Menu" p.15
• "Maintain Aspect Ratio Setting" p.15
• "Reset All (Factory Default) Menu" p.16
• "Kelvin in Color Temperature" p.16
• "Color of Cross-hatching Test Pattern" p.17
Updates to User Operations (Version 2.10)
The following projector operations change in firmware version 2.10.
• You can adjust the focus while displaying the lens calibration message.
gg Related Links
• "Focus Adjustment While Displaying the Lens Calibration Message" p.18
To Next Page
Loading...
Need help?
General
