Contents
2
Introduction to the Updated Firmware 3
Features of Firmware Version 2.00 .................................................. 4
Updates to Projector Menus (Version 2.00)........................................................................... 4
Updates to Projector Status Information (Version 2.00)................................................... 4
Updates to User Operations (Version 2.00)............................................................................ 4
Features of Firmware Version 2.10 .................................................. 5
Updates to Supported Software (Version 2.10).................................................................... 5
Updates to Projector Menus (Version 2.10)........................................................................... 5
Updates to User Operations (Version 2.10)............................................................................ 5
Details of Updated Firmware 6
Details of Updated Projector Menus (Version 2.00)....................... 7
Light Source Calibration Menu................................................................................................... 7
Details of Updated Projector Menus (Version 2.10)....................... 8
Cursor Position Memory of Projector Menus........................................................................ 8
EDID Menu.......................................................................................................................................... 8
Maintain Aspect Ratio Setting .................................................................................................... 8
Reset All (Factory Default) Menu ............................................................................................... 9
Kelvin in Color Temperature........................................................................................................ 9
Color of Cross-hatching Test Pattern..................................................................................... 10
Details of Updated Projector Status Information (Version 2.00) 11
Temp Error FE and Temp Warning FE ................................................................................... 11
Details of User Operation Change (Version 2.00)......................... 13
On-Screen Display Operation................................................................................................... 13
Details of User Operation Change (Version 2.10)......................... 14
Setting an IP Address Using the LCD Screen...................................................................... 14
Focus Adjustment While Displaying the Lens Calibration Message.......................... 14
Appendix 15
Notices............................................................................................... 16
Copyright Notice ........................................................................................................................... 16
General Notice................................................................................................................................ 16
Copyright Attribution .................................................................................................................. 16