Epson EB-L25000unl Firmware Update

Details of Updated Projector Menus (Version 2.10)
9
Previous Settings Menu (Version 1.00)
Top menu Sub menu Items or setting
values
Settings Geometry
Correction
Curved Surface Correct Shape
Horizontal
Linearity
Vertical Linearity
New Settings Menu (Version 2.10)
Top menu Sub menu Items or setting
values
Settings Geometry
Correction
Curved Surface Correct Shape
Horizontal
Linearity
Vertical Linearity
Maintain Aspect
Ratio
To project onto a curved surface while maintaining the aspect ratio, set
Maintain Aspect Ratio to On.
Reset All (Factory Default) Menu
The Reset All (Factory Default) menu is added to the Reset menu.
Previous Reset Menu (Version 1.00 and Version 2.00)
See Light Source Calibration Menu updated in version 2.00.
New Reset Menu (Version 2.10)
Top menu Sub menu Items or setting values
Reset Reset All Memories
Light Source Calibration Run Now
Run Periodically
Schedule Settings
Last Run
Reset All Config
Reset All (Factory Default)
You can use the Reset All (Factory Default) menu to reset all projector's
settings. Password protected items are not reset.
You need to enter a password to perform a reset. The default password is set
to "0000". Change this to your own desired password.
gg Related Links
• "Light Source Calibration Menu" p.7
Kelvin in Color Temperature
The color temperature is specified with Kelvin in all color modes.

Epson EB-L25000unl Specifications

General

Brand	Epson
Model	EB-L25000unl
Category	Projector
Language	English