Epson EB-L510U - Projector Parts - Base; Projector Parts - Interface Ports

Projector Parts and Functions
13
Projector Parts - Base
Name Function
A
Ceiling mount fixing
points (four points)
Attach the optional ceiling mount here when
suspending the projector from a ceiling.
B
Rear feet When setup on a surface such as a desk, turn to extend
and retract to adjust the horizontal tilt.
C
Screw holes for cable
cover
(EB‑L615U/EB‑L610U
/EB‑L510U/EB‑L610
W/EB‑L610)
Screw holes to fix the cable cover in place.
D
Security cable
attachment point
Pass a commercially available wire lock through here
and lock it in place.
Name Function
E
Air filter cover screws Screws to fix the air filter cover in place.
F
Front adjustable foot When setup on a surface such as a desk, extend the foot
to adjust the position of the image.
gg Related Links
• "Installing a Security Cable" p.103
Projector Parts - Interface Ports
Name Function
A
Computer1 port Inputs image signals from a computer and component
video signals from other video sources.
B
Audio 1 port Inputs audio from equipment connected to the
Computer1 port.
C
Audio 2 port Inputs audio from equipment connected to the
Computer2 port.
D
Audio Out port Outputs audio from the current input source to an
external speaker.