47
Function Command
Epson Web
Control Setting
Availability
Setting Value/Response Value
Batch Setup Range
Settings/Acquire
BARANGE x1 ✔ -
BARANGE? ✔ -
Parameter/Return code 00: All
01: Limited
Light Source Calibration Start
(Run Now)
LTCALB ✔ -
Auto Light Source Calibration
Settings/Acquire (Run
Periodically)
AUTOLTCALB x1 ✔ -
AUTOLTCALB? ✔ -
Parameter/Return code 00: Off
01: On (Run Periodically)
Light Source Calibration Last
Run Acquire
LASTLTCALB? ✔ -
Return code yyyyMMddHHmm (Year, Month, Date, Hour, Minute)
2000 to 2099: yyyy
01 to 12: MM
01 to 31: dd
00 to 23: HH
00 to 59: mm
USB Power in Standby
Settings/Acquire settings
USB Power Settings/Acquire
settings
USBSUPPLY x1 ✔ - (except for EB-L720U/EB-L520U)
USBSUPPLY? ✔ - (except for EB-L720U/EB-L520U)
Parameter/Return code 00: On when projecting
01: Always On
HDMI Out Setting/Acquire
settings
HDMIOUT x1 x2 ✔ - (except for EB-L720U/EB-L520U)
HDMIOUT? x1 ✔ - (except for EB-L720U/EB-L520U)
Parameter/Return code x1 = Setting function
00: HDMI Out Setting
01: Number of Projectors
02: Order
x2 = Value
HDMI Out Setting (x1 = 00)
00: Off
01: On (Pass Through)
Number of Projectors (x1 = 01)
02: 2
03: 3
04: 4
Order (x1 = 02)
01: 1
02: 2
03: 3
04: 4
Menu Color Settings/Acquire
settings
MENUCOLOR x1 ✔ -
MENUCOLOR? ✔ -
Parameter/Return code 00: Black
01: White
NIT (settings only)
Transmitter Connection Guide
Display Settings/Acquire
settings
TRNSGUIDE x1 ✔ -
TRNSGUIDE? ✔ -
Parameter/Return code 00: Off (do not display)
01: On (display)
INIT (settings only)
Transmitter Auto Power On
Settings/Acquire settings
TRNSPWRON x1 ✔ -
TRNSPWRON? ✔ -
Parameter/Return code 00: Off
01: On
INIT (settings only)
INC: Increase the setting value/DEC: Decrease the setting value/INIT: Return to defaults
To Next Page
Loading...
