48
Function classification: Home Screen
Function Command
Epson Web
Control
Setting
Availability
Setting Value/Response Value
Home Screen Auto Disp. AUTOHOME x1 ✔ -
AUTOHOME? ✔ -
Parameter/Return code 00: Off (do not display automatically)
01: On (display automatically)
Home Screen Sort Source
Thumbnails
HSORT x1 ✔ -
HSORT? ✔ -
Parameter/Return code 00: Off
01: On
INIT (settings only)
INC: Increase the setting value/DEC: Decrease the setting value/INIT: Return to defaults
Function classification: Network
Function Command
Epson Web
Control Setting
Availability
Setting Value/Response Value
AMX DDDP BeaconMessage
Acquire
AMX - -
Return code *The response format follows the AMX specifications.
AMXB<-SDKClass=VideoProjector>
<-GUID=EPSON_EMP001><-Revision=1.0.0>
AMX DDDP IP BeaconMessage
Status settings/Acquire status
AMXDDDP x1 ✔ -
AMXDDDP? ✔ -
Parameter/Return code 00: Stop sending BeaconMessage
01: Start sending BeaconMessage
INIT (settings only)
Extron XTP
Settings/Acquire
XTP x1 ✔ -
XTP? ✔ -
Parameter/Return code 00: Off
01: On
Wireless Mode WLPWR x1 ✔ -
WLPWR? ✔ -
Parameter/Return code 00: Off
01: Wireless LAN On
INC: Increase the setting value/DEC: Decrease the setting value/INIT: Return to defaults
Function classification: Screen Mirroring
Function Command
Epson Web
Control Setting
Availability
Setting Value/Response Value
Screen Mirroring
(WFD Power) Settings/Acquire
WDPWR x1 ✔ -
WDPWR? ✔ -
Parameter/Return code 00: Off
01: On
WFD Performance Adjustment
Settings/Acquire
WDPERF x1 ✔ -
WDPERF? ✔ -
Parameter/Return code 01: Setting 1 (Fine)
02: Setting 2
03: Setting 3
04: Setting 4 (Fast)
Reflect WFD Settings WDRESET ✔ -
WFD Interrupt Projection
Settings/Acquire
WDINTRPT x1 ✔ -
WDINTRPT? ✔ -
Parameter/Return code 00: Off
01: On
WFD Information Bar Display
Settings/Acquire
WDINFOBAR x1 ✔ -
WDINFOBAR? ✔ -
Parameter/Return code 00: Off
01: On
INC: Increase the setting value/DEC: Decrease the setting value/INIT: Return to defaults
To Next Page
Loading...
