Epson EcoTank ET-3800 Series - Page 162

11.
Close the scanner unit.
Note:
e scanner unit is designed to close slowly and resist a little as a precaution against catching ngers. Continue to close
even if you feel some resistance.
12.
Follow the on-screen instructions to set the ink level of the color of the ink you relled.
c
Important:
Even if you do not rell ink up to the upper line on the ink tank, you can continue using the printer. To keep your
printer operating at its best, however, ll ink tank up to the upper line and reset the ink level immediately.
Related Information
& “Ink Bottle Codes” on page 210
& “Ink Bottle Handling Precautions” on page 156
& “Cleaning Spilled ink” on page 102
Notes on Resetting the Ink Level
Be sure to reset the ink level
aer relling
the ink.
If you relled two or more colors, you need to select all of the colors that you relled and reset the ink level.
Unless you reset the ink level, the ink level displayed does not change even aer relling the ink.
Related Information
& “Checking the Status of Consumable” on page 87
Solving Problems > It is Time to Rell the Ink > Relling the Ink Tanks
162