Epson EcoTank ET-3800 Series - Disconnecting Wi-Fi Direct (Simple AP) Connection; Changing the Wi-Fi Direct (Simple AP) Settings such as the SSID

Disconnecting Wi-Fi Direct (Simple AP) Connection
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specic device, disconnect from the device
instead of the printer.
1.
Select
on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2.
Select Wi-Fi Direct.
e Wi-Fi Direct information is displayed.
3.
Select Start Setup.
4.
Select
.
5.
Select Disable Wi-Fi Direct.
6.
Press the OK button.
7.
When a completion message is displayed, close the screen.
e screen automatically closes aer a specic length of time.
8.
Press the
button.
Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from > Wi-Fi
Direct > Start Setup >
, and then the following menu items are displayed.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi …
196