Epson EcoTank ET-3800 Series - Copying Originals Using Good Quality

❏ Landscape Originals
c
Important:
If you want to copy originals that are not supported by the ADF, use the scanner glass.
“Originals that are not Supported by the ADF” on page 32
Note:
You can also place the originals on the scanner glass.
“Placing Originals” on page 31
2.
Select Copy on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
3.
Select the Advanced Settings tab, and then select Multi-Page > 2-up.
4.
Specify the layout order and the original orientation, and then select OK.
5.
Press the
x button.
Copying Originals Using Good Quality
You can copy originals without shadows and punched holes.
1.
Place the originals.
If you want to copy multiple originals, place all of the originals on the ADF.
“Placing Originals” on page 31
2.
Select Copy on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
3.
Select the Advanced Settings tab, select Remove Shadow or Remove Punch Holes, and then enable the
setting.
4.
Press the
x button.
Copying > Available Copying Methods > Copying Originals Using Good Quality
69