Printing Collages of Photos and Background Patterns
You can print photos on a memory device by creating a layout and adding a background design.
1.
Load paper in the printer.
“Loading Paper” on page 34
2.
Insert a memory device into the SD card slot or the external interface USB port of the printer.
“Inserting and Removing a Memory Card” on page 42
“Inserting and Removing an External USB Device” on page 42
3.
Select Print Photos on the control panel.
4.
Select Collage > Photo Collage.
5.
Select the layout.
6.
Select the type of background you want to use. is may not be available for some layouts.
❏ Design
Select the pattern, such as borders or polka dots, or Original Design, and then select the pattern you
created using the design paper feature.
❏ No Background
Go to the next step.
7.
When a message telling you that loading photos is complete is displayed, select OK.
8.
Do one of the following.
❏ When you select single photo layout in step 5: Select
, select one photo on the select photo screen, and
then select Next. Go to step 13.
❏ When you select multiple photo layout in step 5 and place photos automatically: Select Automatic Layout,
select photos on the select photo screen, and then select Next. Go to step 13.
❏ When you select multiple photo layout and place photos manually: Go to the next step.
9.
Select
.
10.
Select the photo you want to print on the select photo screen, and then select Done.
Select Single View, and then select
to edit the photo if necessary.
“Menu Options for Editing Photos” on page 53
Printing
>
Printing Photos
>
Printing Photos from a Memory Device
48
To Next Page
Loading...
