Epson EF-11 - Projector Parts - Rear; Projector Parts - Base

Projector Parts and Functions
10
Projector Parts - Rear
Name Function
A
Speaker Outputs audio.
B
Air exhaust vents Exhaust vents for air used to cool the projector
internally.
Caution
While projecting, do not put your face or
hands near the air exhaust vent, and do not
place objects that may become warped or
damaged by heat near the vent. Hot air from
the air exhaust vent could cause burns,
warping, or accidents to occur.
Projector Parts - Base
Name Function
A
Foot release lever Press the foot release lever to extend and retract the
front adjustable foot.
B
Air intake vent Takes in air to cool the projector internally.
C
Mount plate fixing
point
Attach the optional or supplied mount plate here.
D
Speaker Outputs audio.
E
Rear feet (Mount
plate fixing points)
Loosen these feet by turning them counterclockwise,
and then remove them to attach the optional or
supplied mount plate.
F
Air filter cover Open to access the air filter.