Epson EF-11 - Installing the Projector on VESA Compliant Mounting Hardware or a Tripod

Projector Placement
17
See the Appendix for details about how far to place the projector from the
screen based on the size of the projected image.
a
When correcting keystone distortion, your image is slightly smaller.
gg Related Links
• "Screen Size and Projection Distance" p.92
Installing the Projector on VESA Compliant Mounting
Hardware or a Tripod
You can install the projector onto VESA compliant mounting hardware or a
tripod using the optional or supplied mount plate (ELPMB65).
a
• You can install the projector on VESA compliant (75 × 75mm)
mounting hardware.
• You can install the projector on a tripod for which 1/4-20UNC size
fixed screws can be used.
• When installing the projector in a high place, be sure to install the
optional security wire set (ELPWR01) for safety purposes.
a
Turn the projector upside down.
b
Loosen the rear feet by turning them counterclockwise, and then
remove them.