Projector Placement
18
c
When installing the projector in a high place, thread the optional
security wire set (ELPWR01) through the mount plate.
d
Attach the mount plate to the projector and secure it in place with the
screws that come with the mount plate.
Caution
Do not use the rear feet that you removed in step 2 to fix the mount plate.
They could loosen and cause the projector to fall.
e
Install the projector onto VESA compliant mounting hardware or a
tripod. For details, see the documentation supplied with the mounting
hardware or tripod.
Caution
When installing the projector on the tripod, make sure you securely fix the
tripod's screws. If you place the projector upside down, the screws could
loosen and cause the projector to fall from the tripod.
To Next Page
Loading...
