Projector Placement
16
Front/Rear
Front Upside Down/Rear Upside Down
a
If you project from the ceiling or from the rear, select the correct
Projection setting and, if necessary, adjust the OSD Rotation setting.
s Settings > Installation > OSD Rotation
gg Related Links
• "Precautions on Installation" p.16
• "Projection Modes" p.29
Precautions on Installation
Note the following precautions when installing the projector.
Installation space
Attention
Be sure to leave the following amount of space around the projector so as not to
block the air exhaust and intake vents.
A
10 cm
B
20 cm
C
30 cm
Caution
Install the supplied AC adapter more than 30 cm away from the projector. If the
temperature of the AC adapter rises due to heat from the projector, the projector
may not operate properly.
Projection Distance
The distance at which you place the projector from the screen determines the
approximate size of the image. The image size increases the farther the
projector is from the screen, but can vary depending on the aspect ratio and
other settings.
To Next Page
Loading...
