Image Shape
33
d
Select Installation > Keystone and press .
e
Select Quick Corner and press . Then press again if necessary.
You see the area selection screen.
f
Use the arrow buttons to select the corner of the image you want to
adjust. Then press .
a
To reset the Quick Corner corrections, hold down for about
two seconds while the area selection screen is displayed, and then
select Yes.
g
Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press .
a
• If you see this screen, you cannot adjust the shape any further
in the direction indicated by the gray triangle.
h
Repeat steps 6 and 7 as needed to adjust any remaining corners.
i
When you are finished, press .
gg Related Links
• "Projector Feature Settings - Settings Menu" p.64
To Next Page
Loading...
