Projector Installation Settings - Installation Menu
80
You can correct distortion in the projected image by following the on-screen
instructions from the Installation menu.
You can make the following corrections to the image shape and the projected
image from this menu.
• Correct distortion in the projected image quickly using the Epson Setting
Assistant app.
• Correct the position of the four corners of the projected image or fine-tune
point correction using a remote control.
• Correct the top of the projected image so that it is straight by using a
remote control (correct the bottom of the projected image when the
projector is installed on the ceiling).
• Compensate the color of the projected image to match colored walls.
a
When you use the Epson Setting Assistant app, the Flexible Picture
setting will be reset.
gg Related Links
• "Correcting Distortion in the Image" p.42
To Next Page
Loading...
