Useful Functions
59
Connection example 1: Viewing without an AV amplifier (audio is output from the Optical Audio-
Out port)
Audio is output from the sound bar connected to the Optical Audio-Out port. Use a commercially available
optical digital cable to connect to the sound bar.
c
•
When connecting a device, such as a sound bar, to the Optical Audio-Out port on the WirelessHD
Transmitter, check that Audio Out Device is set to WiHD Transmitter (Optical).
s Settings - HDMI
Link - Audio Out Device p.89
•
You cannot output some audio from the Optical Audio-Out port due to restrictions in audio standards
*
.
- Lossless audio
- Lossy high-bandwidth audio
- Immersive audio
* As of July 2016. This may be changed in the future.
Downloaded from www.vandenborre.be
To Next Page
Loading...
