What to do if Epson EH-TW6800 shows High Temp Warning?
The 'High Temp Warning' indicates that the projector's temperature is rising. You can continue projecting, but if the temperature rises too high again, projection will stop automatically. Ensure there is at least 20 cm between the wall and the Epson Projector's exhaust vent if it's installed next to a wall. Also, check if the air filter is clogged and clean it if necessary.
Provides instructions on how to install the projector, including image position and alignment.
Covers turning on the projector and initial projection setup.
Explains how to navigate and use the projector's Home screen for source selection and functions.
Steps for setting up the WirelessHD Transmitter for wireless connectivity.
Setting up and projecting images over a wired network connection.
Instructions for setting up and connecting to a wireless network.
Guide to using the Epson iProjection app for smartphone and tablet projection.
Guidance on identifying projector issues and checking indicators.
Troubleshooting steps for common image display issues like no image or distorted visuals.
Steps to resolve issues where the remote control is unresponsive.
Solutions for issues related to WirelessHD image projection and interference.
Troubleshooting for wireless LAN connectivity and network projection issues.
Instructions for cleaning the projector's air filter, lens, and main unit.
Detailed instructions on how to safely replace the projector lamp.
Technical specifications for the EH-TW6800 and EH-TW6300 projector models.
To Next Page
General
