Projector Network Settings - Network Menu
124
Setting Options Description
WPA2/WPA3-PSK Connects in WPA2/WPA3 personal
mode. Encryption method is selected
automatically according to the access
point settings. Set a passphrase which is
the same for the access point.
WPA3-EAP Connects in WPA3 enterprise mode.
Encryption method is selected
automatically according to the access
point settings. (Available only for models
that support WPA Enterprise security.)
WPA2/WPA3-EAP Connects in WPA2/WPA3 enterprise
mode. Encryption method is selected
automatically according to the access
point settings. (Available only for models
that support WPA Enterprise security.)
Passphrase Various
passphrases from 8
to 32 characters
(when entering
from a Web
browser: various
passphrases from 8
to 63 characters)
For WPA2-PSK, WPA3-PSK and
WPA2/WPA3-PSK security, selects the
pre-shared passphrase used on the
network.
When the passphrase is entered and the
[Enter] button is pressed, the value is set
and displayed as an asterisk (*).
We recommend changing the passphrase
periodically for security. If the network
settings are initialized, it returns to the
initial passphrase.
EAP Method Set the EAP settings for WPA3-EAP and
WPA2/WPA3-EAP security. (Available
only for models that support WPA
Enterprise security.)
Setting Options Description
EAP Type EAP Type: selects the protocol for
authentication.
• PEAP: authentication protocol widely
used in Windows Server.
• PEAP-TLS: authentication protocol
used in Windows Server. Select this
when using a client certificate.
• EAP-TLS: authentication protocol
widely used to use a client certificate.
• EAP-FAST: select this when these
authentication protocols are used.
User name User name: Enter up to 64 alphanumeric
characters. You can enter up to 32
alphanumeric characters in the projector
menu. To enter more than 32 characters,
use your Web browser. You can enter a
domain name by adding it before the
user name and separating them with a
backslash (domain\username).
When importing a client certificate, the
name the certificate was issued to is
automatically set.
Password Password: Enter a password up to 64
alphanumeric characters for
authentication when EAP Type is set to
PEAP or EAP-FAST. You can enter up
to 32 alphanumeric characters in the
projector menu. To enter more than 32
characters, use your Web browser. After
you enter the password and select Set,
the password is displayed as an asterisk
(*).
Client Certificate Client Certificate: imports the client
certificate when EAP Type is set to
PEAP-TLS or EAP-TLS.
Verify Server Cert. Verify Server Cert.: Set to On to verify
the server certificate when a CA
certificate has been set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
