What to do if Epson Projector shows High Temp Warning?
You can continue projecting when the Epson projector shows a High Temp Warning. However, if the temperature rises too high again, projection will stop automatically. Ensure there is at least 20 cm between the wall and the projector's exhaust vent if the projector is installed next to a wall. Also, clean the air filter if it is clogged.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 60000:1 |
| Screen size compatibility | - \ |
| Projection distance (wide) | 2.35 - 3.82 m |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | -30 - 30 ° |
| Projector brightness (economic mode) | 1650 ANSI lumens |
| Focus | Manual |
| Throw ratio | 1.33 - 2.16:1 |
| Zoom capability | Yes |
| Focal length range | 18.2 - 29.2 mm |
| Aperture range (F-F) | 1.51 - 1.99 |
| RMS rated power | 10 W |
| Number of built-in speakers | 1 |
| Built-in display | - |
| Lamp type | UHE |
| Lamp power | 200 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4500 h |
| Service life of light source (economic mode) | 7500 h |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 296 W |
| Power consumption (economy mode) | 227 W |
| Color modes (2D) | Bright cinema, Cinema, Dynamic, Natural |
| Color modes (3D) | Cinema, Dynamic |
| Video processing | 10 bit |
| Supported 3D formats | Side by side, Top and bottom |
| DVI port | No |
| Composite video in | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Noise level | 37 dB |
| Country of origin | Philippines |
| Noise level (economic mode) | 27 dB |
| Placement | Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| Pallet width | 800 mm |
| Pallet height | 3390 mm |
| Pallet length | 1200 mm |
| Pallet width (UK) | 1000 mm |
| Quantity per pack | 1 pc(s) |
| Quantity per pallet | 72 pc(s) |
| Quantity per pallet layer | 6 pc(s) |
Weight and Dimensions| Depth | 285 mm |
|---|---|
| Width | 309 mm |
| Height | 122 mm |
| Weight | 3500 g |
| Package depth | 380 mm |
| Package width | 375 mm |
| Package height | 175 mm |
| Package weight | 4720 g |
Covers the procedures for powering the projector on and off.
Optimizes image quality by selecting different color modes.
Instructions for charging, wearing, and safety precautions for 3D glasses.
Explains projector status via indicator lights for errors and operation.
Resets the lamp hour counter after lamp replacement.
To Next Page
