Configuration Menu
66
Function Menu/Settings Explanation
Advanced
Gamma 2,1,0,-1,-2 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while viewing the graph.
s p.39
Customized
*3
Reset
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s p.38
EPSON Super White On, Off (This is only available when receiving sig-
nal input from the HDMI1 or HDMI2 port.)
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
Power Con-
sumption
Normal, ECO You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto Iris
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image.
s p.36
Reset
Yes, No
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
*1
This is only displayed when a HDMI1 or HDMI2 image signal is being input.
*2
This is only displayed when an HDMI1, HDMI2, PC, or Screen Mirroring image signal is being input.
*3
Settings are saved for each type of input source or Color Mode.
Signal menu
The Signal menu cannot be set when a USB or LAN image signal is being input.
To Next Page
Loading...
