Epson EH-TW5825 - User Manual

Rebecca SteeleAug 2, 2025

What to do if Epson Projector shows High Temp Warning?

Z
ztuckerAug 2, 2025
If your Epson Projector displays a High Temp Warning, you can continue projecting for a while. However, if the temperature rises excessively again, the projection will stop automatically. Ensure there is at least 20 cm of space between the projector's exhaust vent and any nearby wall. Also, clean the air filter if it's clogged, and verify that nothing is blocking the area around the inlet and that the temperature around the inlet is not too high.

Epson EH-TW5825 Specifications

General

Matrix size	0.61 \
Heat dissipation	1009.8 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Projection distance	2.35 - 3.82 m
Vertical scan range	192 - 240 Hz
Projection technology	3LCD
Contrast ratio (typical)	70000:1
Screen size compatibility	30 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-30 - 30 °
Projector brightness (economic mode)	1780 ANSI lumens
3D	No
Full HD	Yes
Video processing	10 bit
Video color modes	Cinema, Dynamic, Natural, Bright cinema
Analog signal format system	Not supported
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	4500 h
Service life of light source (economic mode)	7500 h
Throw ratio	1.33 - 2.00:1
Focal length range	18.2 - 29.2 mm
Aperture range (F-F)	1.51 - 1.99
Vertical lens shift range	-60 - 60 %
Noise level	36 dB
Country of origin	Philippines
Operating system installed	Android
Noise level (economic mode)	28 dB
Placement	Ceiling, Desktop
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
RMS rated power	10 W
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	297 W
Power consumption (economy mode)	227 W
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Pallet weight	0 g
Quantity per pack	1 pc(s)
Quantity per pallet	66 pc(s)
Harmonized System (HS) code	85286200
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity	0

Weight and Dimensions

Depth	315 mm
Width	309 mm
Height	122 mm
Weight	3800 g
Package depth	410 mm
Package width	380 mm
Package height	180 mm
Package weight	5280 g

Summary

Introduction

Part Names and Functions

Details the names and functions of various projector parts, including front, rear, and base sections.

Remote Control

Covers the projector's remote control and the Android TV remote control functions and button layouts.

Preparing

Installing the Projector

Covers projector placement, table setup, ceiling mounting, and projection distance calculations.

Connecting Devices

Explains connecting video equipment, computers, Bluetooth devices, and external speakers for audio output.

Basic Operations

Projecting Images

Guides on powering the projector on/off, opening the lens cover, and troubleshooting no image display.

Adjusting Projected Image Settings

Instructions for adjusting focus, zoom, height, tilt, keystone distortion, volume, and A/V mute temporarily.

Adjusting the Image

Image Quality and Color Settings

Covers color mode, aspect ratio, sharpness, image enhancement, auto iris, color temp, RGB, hue, saturation, and brightness.

Gamma Adjustment

Details gamma adjustment methods, including correction values and adjustment graph.

Saved Image Quality Memory

Explains how to save, load, erase, and rename image settings using the memory function.

Useful Functions

HDMI Link Function

Explains how to use HDMI Link for connected device operations and audio output selection.

Configuration Menu

Menu Operations and Settings

Explains how to navigate the Configuration menu and details settings for Image, Signal, Settings, Extended, Info, and Reset.

Troubleshooting

Reading Projector Indicators

Describes indicator status during errors, warnings, and normal operation for troubleshooting.

Problem Solving Guide

Offers solutions for problems related to images, noise, projection start, remote control, and connectivity issues.

Maintenance

Cleaning Projector Parts

Provides steps for cleaning the air filter, main unit, and lens to maintain performance and image quality.

Replacing Consumables

Details how to replace the air filter and the lamp, including resetting lamp hours after replacement.

Appendix

Specifications and Supported Resolutions

Lists projector specifications and supported resolutions for PC, SD, and HD signal inputs.

Safety Information and Symbols

Explains safety symbols, provides warnings, cautions, and lists safety-related information.

Glossary and General Notices

Defines technical terms used in the guide and includes general legal notices, trademarks, and disclaimers.