Configuration Menu
46
Function Menu/Settings Explanation
Auto Iris
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image.
s p.34
Reset
Yes, No
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
*
Settings are saved for each type of input source or Color Mode.
Signal menu
Function Menu/Settings Explanation
Aspect
*1
Auto
*2
, Normal, Full, Zoom Selects the aspect mode. s p.32
Overscan
*1
Auto, Off, 4%, and 8% Changes the output image ratio (the range of the
projected image).
•
Off, 4%, 8%: Sets the range of the image. When
set to Off, the entire range of the image is pro-
jected. Depending on the image signal, you may
notice noise at the top and bottom of the image.
•
Auto: Automatically sets to Off or 8% depend-
ing on the input signal.
Advanced
Video Range
*1
Auto, Limited
(16-235), Full
(0-255)
When set to Auto, the video level for the DVD
input signal is automatically detected and set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD/Blu-ray disc player's
video level. Your player may be set to Normal
(Limited) or Expand (Full).
EDID Normal, 21:9 Lets you change the EDID settings.
Restart the projector after changing the EDID.
Reset
Yes, No
Resets all Signal settings except for Aspect.
*1
Settings are saved for each type of input source or signal.
*2
You may not be able to make selections depending on the source or type of signal.
Settings menu
Function Menu/Settings Explanation
Keystone
H/V-Keystone
V-Keystone -60 to 60
Corrects keystone distortion. s p.28
•
H/V-Keystone: Manually corrects horizontal and
vertical distortions.
s p.28
•
Quick Corner: Corrects the corners of the pro-
jected image individually.
s p.29
H-Keystone -60 to 60
Auto V-Key-
stone
On, Off
H-Keystone
Adjuster
On, Off
Quick Corner -
To Next Page
Loading...
