Basic Operations
24
Projecting Images
Turning On the Projector
a
Connect the equipment to the
projector.
b
Connect the power cord supplied.
c
Press the standby button on the
remote control or the control panel to
turn on the projector.
Remote control Control panel
The projector's status indicator flashes blue
as the projector warms up. Once the
projector is warmed up, the standby
indicator and the status indicator turn blue.
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power cord
to the projector without having to
press any buttons.
s
Extended -
Operation - Direct Power
On p.49
d
Open the lens cover.
e
Turn on the connected equipment.
Warning
•
Do not use the projector in locations where
flammable or explosive gases such as those used
in air dusters or insecticides may be present in the
atmosphere. If flammable sprays have been used
around the projector, be sure to ventilate the area
thoroughly before turning on the projector.
•
Do not look into the lens during projection. The
powerful light emitted could cause damage to
eyesight. Pay close attention to how your child
behaves.
•
Do not stand in front of the lens during projection.
Clothes could be damaged due to the high
temperature.
•
Do not block the light from the projector with a
book and so on during projection. Blocking the
light from the projector may cause the item
exposed to the light to become hot and melt, or
cause burns or a fire to occur. Also, when light is
reflected back into the projector, it can cause the
lens to become hot and a malfunction to occur. If
you need to stop projecting, use A/V Mute or turn
off the projector.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
