Configuration Menu
50
Info menu
Function Menu/Settings Explanation
Projector Info
Lamp Hours Displays the cumulative lamp operating time.
Source Displays the current input source.
Input Signal Displays the input signal format of the current input source.
Resolution Displays the resolution.
Scan Mode Displays the scan mode.
Refresh Rate Displays the refresh rate.
Sync Info Displays the image signal information.
This information may be needed if service is required.
Color Depth Displays the color depth and color difference.
Status This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Serial Number Displays the projector's serial number.
Version
Main Displays the firmware version of the projector.
Reset menu
Function Explanation
Reset Lamp Hours
Resets the cumulative lamp hours to 0 H. Reset when you replace the lamp.
Reset Memory
Resets all items for Memory to their default settings.
Reset All Config
Resets all items in the Configuration menu to their default settings.
The following items are not reset to their defaults: Memory, Lamp Hours, and
Language.