Introduction
8
Name Function
d
Temperature indicator
Flashes orange if the internal temperature is too high. Shows the projector's
errors through a combination of other indicators lit and flashing.
s p.51
e
[HDMI] button
Changes to the image from the HDMI port. s p.25
f
Volume (Left/Right)
buttons
•
Adjusts the volume. s p.31
•
Selects menu items or adjustment values while displaying the projector's menu.
•
Performs horizontal keystone correction when the Keystone screen is displayed.
s p.28
g
Keystone (Up/Down)
buttons
•
Adjusts keystone distortion in projected images. s p.28
•
Selects menu items or adjustment values while displaying the projector's menu.
h
[Esc] button
Returns to the previous menu level when a menu is displayed. s p.44
i
[Enter] button
Selects functions and settings when a menu is displayed. s p.44
j
[Menu] button
Displays and closes the Configuration menu.
On the Configuration menu, you can make adjustments and settings for Sig-
nal, Image, Input Signal, and so on.
s p.44
k
[Home] button
Switches to the image from Android TV.
c
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
s
Extended - Operation - Illumination p.49
Rear
Name Function
a
Remote receiver
Receives signals from the remote control. s p.23
b
Service port
Service port. This is not normally used.
c
Audio Out port
Outputs audio during playback to external speakers. s p.21
d
HDMI port
Connects HDMI compatible video equipment and computers. s p.19
e
Power inlet
Connects a power cord. s p.24
To Next Page
Loading...
