Basic Operations
25
Projecting Images
Turning On the Projector
a
Connect the equipment to the
projector.
b
Connect using the power cord
supplied.
c
Press the button on the remote
control or the control panel.
Remote control Control panel
The operation indicator flashes blue as the
projector warms up. Once the projector is
warmed up, the operation indicator stops
flashing and turns blue.
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power cord
to the projector without having to
press any buttons.
s
Extended -
Operation - Direct Power
On p.71
d
Open the lens cover.
e
Turn on the connected equipment.
Warning
•
Do not look into the lens during projection. The
powerful light emitted could cause damage to
eyesight.
•
Do not stand in front of the lens during projection.
Clothes could be damaged due to the high
temperature.
To Next Page
Loading...
