Basic Operations
28
Adjusting the Projected Image
c
Since images are unstable immediately after the projector is turned on, before you make focus, zoom,
or lens shift settings, we recommend waiting 30 minutes or more after starting to project the images.
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the
button on the remote control to display the test pattern. The standard for horizontal lines at
the top and bottom uses 2.40:1 CinemaScope.
Press the button again to end the test pattern display.
Adjusting the Focus
Adjust the focus using the focus ring or the focus adjuster.
Adjusting the Projection Size
Adjust the size of the projected image using the zoom ring or the zoom adjuster.
To Next Page
Loading...
