Epson EH-TW5650 - Adjusting the Projected Image

Basic Operations
27
c
Displays the Configuration menu. s p.64
d
Performs menu options assigned to Home Screen in the Extended menu.
s Extended - Home Screen p.71
e
Sets the 3D function. s p.66
f
Changes the Color Mode. s p.34
c
The Home screen disappears after 10 minutes of inactivity.
Turning Off
a
Turn off the connected equipment.
b
Press the button on the remote
control or the control panel.
Remote control Control panel
A confirmation message is displayed.
c
Press the button again.
The operation indicator flashes and the
projector begins to cool down.
d
Wait until cool-down is complete.
When cool-down is complete, the
operation indicator stops flashing.
e
Disconnect the power cord.
c
If the power cord is connected,
some electricity is consumed even
if no operations are made.
f
Close the lens cover.
c
Do not turn the projector back on immediately after turning off the projector. Turning the projector
on/off too frequently can cause the lamp to malfunction.