Configuration Menu
76
Info menu
Function Menu/Settings Explanation
Projector Info
Lamp Hours Displays the cumulative lamp operating time.
Source Displays the name of the port to which the current input
source is connected.
Input Signal Displays the input signal setting of the current input source.
Resolution Displays the resolution.
Scan Mode Displays the scan mode.
Refresh Rate Displays the refresh rate.
3D Format Displays the 3D format of the signal input during 3D projec-
tion (Frame Packing, Side by Side, or Top and Bottom).
Sync Info Displays the image signal information.
This information may be needed if service is required.
Color Depth Displays the color depth.
Status This is information about problems that have occurred on the
projector.
This information may be needed if service is required.
Serial Number Displays the projector's serial number.
Event ID The application error log appears.
s p.89
Version
Main Displays the firmware version of the projector.
Video2
Screen Mirroring
Reset menu
Function Explanation
Reset Lamp Hours
Resets the cumulative lamp hours use time to 0 H. Reset when you replace the
lamp.
Reset Memory
Resets all items for Memory to their default settings.
Reset All
Resets all items in the Configuration menu to their default settings.
The following items are not reset to their defaults: Memory, Lamp Hours, Lan-
guage, and all adjustment values for the Network menu.
To Next Page
Loading...
