Basic Operations
31
•
Projection is set to Front. s Extended - Projection p.71
c
If you do not want to use the Auto V-Keystone function, set Auto V-Keystone to Off.
s
Settings -
Keystone - Auto V-Keystone p.68
Correct manually (H-Keystone adjuster)
Move the horizontal keystone adjuster to the right or left to perform horizontal keystone correction.
c
•
When Keystone is set to Quick Corner, the H-Keystone adjuster does not function. Set it to H/V-
Keystone.
sSettings - Keystone p.68
•
You can correct images up to 30° left or right.
Correct manually (H/V-Keystone)
You can use the buttons on the control panel to correct keystone distortion.
Press the
buttons to display the V-Keystone/H-Keystone gauges.
When the gauges are displayed, press the
buttons to perform vertical correction, and press the
buttons to perform horizontal correction.
When the top or bottom is too wide
When the left or right is too wide
c
•
You can correct images up to 30° right, left, up, or down.
•
You can adjust the volume by pressing the buttons when the gauges are not displayed.
s p.33
•
You can set H/V-Keystone from the Configuration menu. s Settings - Keystone - V-Keystone/H-
Keystone p.68
To Next Page
Loading...
