Troubleshooting
80
Indicators Status Explanation
(blue)
Ready
Wireless LAN is available.
(Flashing blue
quickly)
Connecting
Connecting to a device.
(Flashing blue
slowly)
Error
Wireless LAN error. Select Off as the Wireless LAN Power setting
in the projector's Network menu, and select On again.
If you cannot solve the problem, contact the following address.
s Epson Projector Contact List
Starting
Wireless LAN Off
Wireless LAN connection is unavailable. Check that Wireless
LAN Power is set to On in the Network menu.
When the Indicators Provide No Help
Check the problem
Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problem Page
Problems relating to im-
ages
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
p.81
Moving images being projected from a computer are not projected. p.81
"Not supported" is displayed.
p.82
"No Signal" is displayed
p.82
Images are fuzzy or out of focus. p.82
Interference or distortion appears in the images. p.82
The image is truncated (large) or small, or only a part of the image is
projected.
p.83
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
*
p.83
Images appear dark. p.83
Projection stops automatically. p.84
Problems when projection
starts
The projector does not turn on. p.84
Problems with the remote
control
The remote control does not respond. p.84
Problems with 3D Cannot project correctly in 3D. p.84
To Next Page
Loading...
