Epson ELPMB23 - Checking the Package Contents; Names of Parts

4
1-2 Checking the Package Contents
Open the box and check that nothing is missing.
• Only use the projector mounting screws provided to install the projector plate onto
the projector.
• Prepare the necessary tools before starting.
1-3 Names of Parts
ELPMB22 ceiling mount ELPMB23 ceiling mount
Offset wrench
Hexagon wrench
Projector mounting
screws: 4 pcs. (M4 × 12)/
lock washers: 4 pcs./
plain washers: 4 pcs.
Instruction manual
(this manual)
Ceiling plate
Ball joint
Plate securing screws
(2 pcs.)
Projector plate
Tilt fixing screws (2 pcs.)
Projector plate
Ceiling plate
Tilt adjusting screw/
screw cap
Plate securing screws
(2 pcs.)
Tilt fixing screws (2 pcs.)
ELPMB22
ELPMB23
Tilt adjusting screw/
screw cap
Ball joint
Lens alignment
screws (4 pcs.)
Lens alignment
screws (4 pcs.)