Momentarily turning off images and sound
You can momentarily pause images and sound. When paused, the screen appears completely
black or blue. It can be used when you do not want to show viewers details of operations such
as selecting different files when computer images are being projected.
First press the , select "Setting" and then "A/V Mute". Then select the type of screen to be displayed
when projection is being stopped. The following choices are available.The default setting is the black screen.
Press .
Press once more.
Projection of the images and sound will be restarted.
If you use this function while projecting moving images, the images and sound will still continue to be
played back, and you cannot return to the point where the A/V Mute function was activated.
Functions for
Enhancing Projection
A/V Mute function
Page 39 of Instruction Manual
The indicator will light orange.
Projecting
Remove the lens cover.
Connect the power cord to the projector.
Connect the power cord to an electrical outlet.
Turn on the power for the
input source.
In the case of a VCR,
press the PLAY button.
An image will be projected.
Press the to turn on the
projector's power.
If using the remote control, set the R/C
switch to the ON position and then
press the .
The indicator will start
flashing green and projection
will start. (Warm-up in progress)
(Operation Display)
indicator
Pages 24-27 of
Instruction Manual
To Next Page
Loading...
Need help?
General
