■ ■ ■ ■
16
1. Connect one end of the projector’s Mac mouse cable or
U SB mouse cable to the Mouse/ Com or U SB Mouse port
on the projector
2. Disconnect your Macintosh’s mouse cable. Connect the
other end of the projector’s Mac mouse cable or USB
mouse cable to the mouse port on your Macintosh.
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio In jack on the projector.
2. Connect the other end of the audio cable to the Audio
O ut port on your computer.
Audio In jack
audio cable
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
