■ ■ ■ ■
20
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to
connect the U SB mouse cable.
♦ Note: The USB mouse port on the projector can only be used by
connecting a USB mouse. It is not possible to connect other USB
equipment for use.
Refer to this illustration while following the steps below.
1. Connect one end of the projector’s U SB mouse cable to
the USB Mouse port on the projector.
USB mouse cable
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
