Epson ES-400 II

31
Note: Lightly wrinkled paper may scan better if you slow down the feeding speed during scanning or
smooth out the wrinkles before loading. Use a carrier sheet to scan delicate originals or originals that are
easily wrinkled. To scan originals that are incorrectly detected as double feeds, press the double feed
detection skip button before scanning, or set the Detect Double Feed setting to Off on the Main Settings
tab in the Epson Scan 2 window.
Caution: Do not load the following types of originals directly in the scanner, or they may be damaged or
may damage the scanner:
• Photos
• Originals that are bound
• Passports
• Thermal paper
• Fabric or other non-paper originals
• Originals containing staples or paper clips
• Originals with wet ink or glue
• Ripped originals
• Heavily wrinkled or curled originals
• Originals with holes on the bottom of them
• Transparencies
• Originals with carbon paper backing
• Originals with sticky notes attached
• Glossy originals
Note: Photos scanned using a document scanner may not have the same color depth as the original.
Use a flatbed photo scanner with the optional flatbed scanner dock (ES-400 II) to achieve the best color
reproduction of photos.
Parent topic: Loading Originals in the Input Tray
Loading Plastic and Laminated Cards in the Input Tray
You can load plastic and laminated cards that meet the card specifications in the input tray.