Epson ET-2700 Series - Banding Appears on the Copied Image; An Image of the Reverse Side of the Original Appears in the Copied Image; The Printout Problem Could Not be Cleared; Other Printing Problems

Banding Appears on the Copied Image
If you press the y and the or buttons simultaneously, the printer copies in dra mode and banding
may appear on the printout.
An Image of the Reverse Side of the Original Appears in the Copied
Image
For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
The Printout Problem Could Not be Cleared
If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the
printer driver.
Related Information
& “Uninstalling Applications” on page 93
& “Installing the Latest Applications” on page 92
Other Printing Problems
Printing Is Too Slow
❏ Close any unnecessary applications.
❏ Lower the quality setting. High quality printing slows down the printing speed.
❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while
moving in both directions, and the printing speed increases.
❏ Wi n d o w s
Select High Speed on the printer driver's More Options tab.
❏ Mac OS
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select On as the High Speed
Printing setting.
❏ Disable quiet mode. is feature slows down the printing speed.
❏ Wi n d o w s
Select O as the Quiet Mode setting on the printer driver's Main tab.
❏ Mac OS
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select O as the Quiet Mode
setting.
User's Guide
Solving Problems
119