+ Hold down the and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
+ Turn the printer on while holding down the button to restore the default network
settings. When the network settings are restored, the printer turns on and the network status
lights
ash
alternately.
+
Turn the printer on while holding down the
y
button to print the nozzle check pattern.
Related Information
& “Checking the Error Indicators on the Printer” on page 96
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 20
& “Restoring the Network Settings from the Control Panel” on page 30
User's Guide
Printer Basics
15
To Next Page
Loading...
