Epson ET-2815 - Copy Quality Is Poor

Copy Quality is Poor
Color Missing, Banding, or Unexpected Colors Appear in Copies
The print head nozzles may be clogged.
Solutions
❏ Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then
clean the print head if any of the print head nozzles are clogged. If you have not used the printer for a
long time, the print head nozzles may be clogged and ink drops may not be discharged.
❏ If you printed when the ink levels were too low to be seen in the ink tank windows,
rell
the ink tanks
to the upper lines and then use the Power Cleaning utility to replace the ink inside the ink tubes.
Aer
you use the utility, perform a nozzle check to see if print quality has improved.
& “Checking and Cleaning the Print Head” on page 72
& “Running Power Cleaning” on page 74
You have made a copy in draft mode.
Solutions
If you press the
y and the or buttons simultaneously, the printer copies in dra mode.
Simply press the the
or button on their own.
Note:
For users in Western Europe, the dra mode is not available.
Colored Banding Appears at Intervals of Approximately 2.5 cm
e following causes can be considered.
Solving Problems > Printing, Copying, and Scanning Quality is Poor > Copy Quality is Poor
137