Epson ET-2815 - Page 26

3.
Load paper at the center of the paper support with the printable side facing up.
c
Important:
❏ Do not load more than the maximum number of sheets
specied
for the paper. For plain paper, do not load
above the line just under the
d symbol inside the edge guide.
❏ Load paper short edge rst. However, when you have set the long edge as the width of the user dened size,
load paper long edge rst.
4.
Slide the edge guides to the edges of the paper.
Close the feeder guard aer sliding the edge guides.
c
Important:
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
5.
Slide out the output tray.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Loading Paper > Loading Paper in the Rear Paper Feeder
26