PhotoEnhance produces sharper images and more vivid colors by automatically adjusting the contrast, saturation,
and brightness of the original image data.
Note:
PhotoEnhance adjusts the color by analyzing the location of the subject. erefore, if you have changed the location of the
subject by reducing, enlarging, cropping, or rotating the image, the color may change unexpectedly. Selecting the borderless
setting also changes the location of the subject resulting in changes in color. If the image is out of focus, the tone may be
unnatural. If the color is changed or becomes unnatural, print in a mode other than PhotoEnhance.
1.
On the printer driver's More Options tab, select the method of color correction from the Color Correction
setting.
❏ Automatic:
is
setting automatically adjusts the tone to match the paper type and print quality settings.
❏ Custom: Click Advanced, you can make your own settings.
2.
Set the other items on the Main and More Options tabs as necessary, and then click OK.
3.
Click Print.
Related Information
& “Loading Paper in the Rear Paper Feeder” on page 25
& “Printing Using Easy Settings” on page 34
Printing to Emphasize Thin Lines
You can thicken thin lines that are too thin to print.
1.
On the printer driver's More Options tab, click Image Options in the Color Correction setting.
2.
Select Emphasize in Lines.
3.
Set the other items on the Main and More Options tabs as necessary, and then click OK.
4.
Click Print.
Related Information
& “Loading Paper in the Rear Paper Feeder” on page 25
& “Printing Using Easy Settings” on page 34
Printing
>
Printing Documents
>
Printing from a Computer - Windows
51
To Next Page
Loading...
