Epson ET-2815 - Page 91

Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 163
& “Unavailable Paper Types” on page 165
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 24
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper in the Rear Paper Feeder” on page 25
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not
load above the line indicated by the triangle symbol on the edge guide.
& “Available Paper and Capacities” on page 163
Several Sheets of Paper are Fed at a Time
e following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a
at
surface and operate in the recommended environmental conditions.
& “Environmental
Specications
” on page 178
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 163
& “Unavailable Paper Types” on page 165
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly
91