Epson ET-4750 series User Manual

Error Messages Solutions
Recovery Mode The printer has started in recovery mode because the rmware update
failed. Follow the steps below to try to update the
rmware
again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how
oen
this is required will vary according to the number of pages you print, the type of material that you print and the
number of cleaning cycles that the printer performs.
e
need for replacement of the pad does not mean that your
printer has ceased to operate in accordance with its
specications. e
printer will advise you when the pad
requires replacing and this can only be performed by an authorised Epson Service provider. e Epson warranty
does not cover the cost of this replacement.
Related Information
& “Contacting Epson Support” on page 218
& “Installing the Latest Applications” on page 169
& “Updating the Printer's Firmware using the Control Panel” on page 170
Checking the Printer Status - Windows
1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab.
Note:
❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not
added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut
icon to the taskbar.
❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
Related Information
& “Accessing the Printer Driver” on page 64
Checking the Printer Status - Mac OS
1. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3.
Click EPSON Status Monitor.
You can check the printer status, ink levels, and error status.
User's Guide
Solving Problems
175

Epson ET-4750 series Specifications

General

Type	all in one, fax
Color	black
Touch Screen	yes
Display Size	2.4 inches
Tray Capacity	250
Output Tray Capacity	30
Automatic Document Feeder Capacity	250 sheets
Paper Size	3.5" x 5", 4" x 6", 5" x 7", 8" x 10", 8.5" x 11", 8.5" x 14", a4, a6, half letter, executive, user definable (3.5" x 5" - 13" x 47"); envelope no. 10
Printing Method	color
Color Print Speed	8 pages per minute
Mono Print Speed	15 pages per minute
Print Resolution Mono	up to 4800 x 1200
Print Resolution Color	up to 4800 x 1200
Media Types	plain paper, epson bright white paper, glossy photo paper, matte pape, double-sided matte paper
Two-Sided Printing	yes
Maximum Number of Pages Per Month	up to 5, 000
Photo Printing	yes
Scanner Type	flatbed
Scan Resolution	up to 1200 x 2400
Duplex Scan	no
Fax Function	yes
Cartridges	502 black, cyan, magenta, yellow ink bottles
Number Of Cartridges	4
Number of Ink Tanks	4
Memory Card	yes
Network	wired, wireless
Connectivity	apple airprint, epson iprint, ethernet, google cloud print, usb, wi-fi, wi-fi direct
OS Compatibility	windows 10, windows 8, 8.1, windows 7, windows server 2003 - windows server 2016 (32-bit, 64-bit), mac os x 10.6 - macos 10.12.x
Mobile Devices Connection	yes

Weight and Dimensions

Depth	14.8 inches
Height	9.1 inches
Width	14.8 inches
Net Weight	16.1 pounds