Epson Expression ET-2610 Series User Manual

Select the connection type and then click Next.
Follow the on-screen instructions.
Connecting to a Smart Device
You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.
http://epson.sn > Setup
Note:
If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the
computer
rst.
Making Wi-Fi Settings from the Printer
You can make network settings from the printer's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If the access point supports WPS, you can make settings by using push button setup.
Aer
connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
& “Making Wi-Fi Settings by Push Button Setup” on page 20
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 21
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 22
User's Guide
Network Settings
19

Epson Expression ET-2610 Series Specifications

General

Brand	Epson
Model	Expression ET-2610 Series
Category	All in One Printer
Language	English