Epson Expression ET-2610 Series User Manual

Scanning Photos or Pictures (Photo Mode)
Using Photo Mode in Epson Scan 2, you can scan originals with wide variety of image adjustment features that are
suitable for photos or pictures.
1. Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
2.
Start Epson Scan 2.
3. Select Photo Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Image Type: Select the color for saving the scanned image.
❏ Resolution: Select the resolution.
Note:
e
Document Source setting is
xed
as Scanner Glass, and the Document Type setting is
xed
as
Reective
.
(Reective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
User's Guide
Scanning
62

Epson Expression ET-2610 Series Specifications

General

Brand	Epson
Model	Expression ET-2610 Series
Category	All in One Printer
Language	English