See the information displayed on the printer's control panel to select the printer.
11. On the printer's control panel, select Complete.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Related Information
& “Connecting to Devices other than iOS and Android Using Wi-Fi Direct” on page 34
Connecting to Android Devices Using Wi-Fi Direct
is method allows you to connect the printer directly to your Android device without a wireless router. e
following conditions are required to use this function.
❏ Android 4.4 or later
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Select Smartphone connect on the home screen.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
User's Guide
Network Settings
32
To Next Page
Loading...
